PixeIOrange 5mo ago • 100%
Pergament?
PixeIOrange 5mo ago • 100%
Dann werde ich sie in kalten Nächten reinholen aber morgens gleich wieder raus. Danke dir :)
PixeIOrange 5mo ago • 100%
Ok, danke dir. Werde sie konsequenter mindestens tags über draußen haben. Ab mittwoch gibts ne weile Sonne, dann holen sie hoffentlich einiges nach :)
Edit: Hab jetzt mal mit der App geschaut, der Unterschied ist ja riesig :O
PixeIOrange 5mo ago • 100%
Putting the terms in quotes helps sometimes
PixeIOrange 5mo ago • 100%
And results that are 10+ years old...
PixeIOrange 5mo ago • 100%
Hmm. Meinst du ich kann sie schon dauerhaft draußen lassen? Wird die nächsten nächte allerdings um die 10 grad kalt...
PixeIOrange 5mo ago • 100%
Danke dir :)
PixeIOrange 5mo ago • 100%
Das hört sich schonmal gut an :D
Die können ruhig groß werden, bin ja aufm balkon platzmäßig nicht soo eingeschränkt. Und ja, die Nachbarn könnten tatsächlich problematisch werden. Bin allerdings in Hamburg in nem sehr toleranten Stadtteil, denke mal das wird klappen alles :)
PixeIOrange 5mo ago • 100%
Ja, erster Grow. Bin sehr gespannt wies läuft :)
PixeIOrange 5mo ago • 100%
S
PixeIOrange 5mo ago • 100%
I think he hides in them
PixeIOrange 5mo ago • 100%
I heard it kills thousands of people every year! We must stop this!
PixeIOrange 6mo ago • 100%
Yellow is no color! Its made of green and blue!!
PixeIOrange 6mo ago • 100%
You can install bug nets yourself easily. There are some from tesa, its the net and a roll of velcro-like tape. I love them.
PixeIOrange 6mo ago • 100%
There is animal cruelty in this movie. Could never enjoy it because of this one scene.
PixeIOrange 6mo ago • 100%
Hell it even saves the system after being infected, I am told this by 2 friends and my brother.
No. Once a System is infected you cant trust it anymore no matter what you do. There are many FUD (Fully Un Detected) viruses out there that cant 100% surely be found. You dont know if the found virus has infected the machine with some of these. Its a big red flag that this option is available in kaspersky. Save your data and set up a new system is the only correct, nearly 100% save option.
PixeIOrange 6mo ago • 75%
30 seconds arent that bad.
I once was forced to a five minutes video. Five minutes of pure cringe can feel like hours.
PixeIOrange 7mo ago • 100%
With Lynx You dont even need a browser to browse.
Wichtig. Die Partei ist zwar eine Satirepartei, die Satire minimiert sich aber im Zusammenhang mit wichtigen Themen.
Hallo ihr. Mir ist schon vor längerem aufgefallen, dass der Michel ab und an merkwürdig läutet. Es sind mehrere schläge in einem komischen Intervall. Und zwar: dong - dong - pause - dong - pause - dong -pause - dong - dong - dong. Das passiert immer mal "zwischendurch", eben gerade um 12:16. Sonst scheint es dafür auch keine "geraden" oder festen Zeiten zu geben. Hat jemand ne Ahnung, was da passiert?
Tldr: Er spielt Piano in einem Kaufhaus in UK. Reporter/innen der CCP wollen nicht gefilmt werden und wollen es ihm verbieten. Es gibt auch ein follow up video in dem er erzählt, dass die CCP das Video nun sperren lassen will. Könnte noch "interessant" werden in nächster Zeit.
Hallo, ihr. Vielleicht könnt ihr mir weiterhelfen: Seit einiger Zeit kribbelt mein Körper nach dem Schlafen. Es ist ein angenehmes Kribbeln, wie beim Aufwärmen der Hände nach einer Schneeballschlacht. Es beginnt 1-2 Minuten nach dem Aufwachen, egal wann ich schlafe, und bleibt ca 20-30 Minuten. Das ganze fing vor ca 2 Jahren an, erst vielleicht 2 mal im Jahr und jetzt ist es nach jedem Schlaf. Es wird intensiver über die Zeit. Kann es mit einer gesünderen Ernährung zu tun haben? Habt ihr ne Idee, was das sein könnte? Gehe natürlich noch zum Arzt damit, aber wenn ich schon weiß was es ist, muss ich nicht erst umständlich erklären. Danke für eure Aufmerksamkeit.
Muss ich mir sorgen machen? Nen Kammerjäger holen? Können die von nem Nachbarn rübergekommen sein? Hab im letzten halben Jahr ca. 3 von ihnen gefunden. (warum ist meine wand da so blau? Ist im rl nicht so)
![IMG_20231111_205431](https://feddit.de/pictrs/image/c220129b-c71a-41a2-9646-0b39d54ababf.jpeg) I cant get my Anycubic Kobra 2 with Klipper to print correct. The first mm of each layer are faulty, resulting in a bad tooth in gears. I tried to slow down the print, tried to minimize/deactivate retraction, fiddled with z offset and first layer height, lowered bed temp, altered the extrusion rate. Nothing works. Everything else seems fine, slim z seam, nice walls, no over/underextrusion. Anyone got a hint how i could fix that? Edit: I cancelled that Print, the Problem is only in the first tooth: ![IMG_20231111_212736_745](https://feddit.de/pictrs/image/994f1f66-516b-41d1-b4b2-8a5efb1135c2.jpeg) the tooth in the marking should look like the ones above it.
Hello fellow withprinters. Whats happening here? Stringing is not the problem, if i print string tests, they are good. Its only in holes, the walls wont stick. Any suggestions for a fix? Edit: Found the problem. The temperature sensor was faulty. Changed it and now everything is fine. ![IMG_20231029_185945](https://feddit.de/pictrs/image/c3cb7aa3-a948-41ba-abcc-96eb239198a2.jpeg) ![IMG_20231029_185931](https://feddit.de/pictrs/image/cf6d8b57-3842-4a09-b008-9137e595186b.jpeg)
Ist erst ca 2 wochen da drin. Zersetzt sich das Plastik? Läuft das ganze irgendwann aus?
I just want to brag a bit. Printed on an Anycubic Kobra 2. Runs without much problems. At the moment 10 Days on a single winding, tweakble up to 32 days. The weight is from another wooden self build clock. Edit: cant i upload videos? Edit 2: https://www.myminifactory.com/object/3d-print-32-day-clock-easy-build-156759 (12$) Edit 3: I just printed this clock, i didnt plan it myself if this is unclear...
Would this be a good idea? The bottom surface of the printed things would be way more flat. Anyone tested this? Any reason why i shouldnt test it?
Should i worry? Any suggestions for a fix? Didnt find anything because i dont know what search terms to use... Edit: Thanks for your responses. I talked to my brother, he told me the retraction speed was too slow (25mm/s), i changed it to 40mm/s and realized i activated the wrong printer profile. Silly me. Ill do a test print now. Ill look into your suggestions if this wont help.