How can I politely phrase, "My company is full of old men in leadership who don't understand data so using AI effectively is next to impossible"
  • SzethFriendOfNimi SzethFriendOfNimi 3h ago 96%

    And if you want to tank it without overtly tanking it.

    “We will need to establish a review and governance board to establish standard data structures and reporting that can be used to drive the initiative.

    It will need to be cross team and cross specialty so we should start by establishing a group to identify those people so we can proceed”

    A year later and you’ll be lucky if they’ve even picked out who can be part of the review process let alone agree on some convention and adjusting their tooling and processes to make that work.

    24
  • If a planet was completely covered in water, wouldn't it all be freshwater?
  • SzethFriendOfNimi SzethFriendOfNimi 5h ago 100%

    There’s also heat exchange so you’ll have deep sea vents where there could be all kinds of caustic stuff and/or minerals.

    So it wouldn’t necessarily be fresh even if that stuff wasn’t saline

    7
  • Proof by fucking obviousness
  • SzethFriendOfNimi SzethFriendOfNimi 6h ago 100%

    That assumes that 1 and 1 are the same thing. That they’re units which can be added/aggregated. And when they are that they always equal a singular value. And that value is 2.

    It’s obvious but the proof isn’t about stating the obvious. It’s about making clear what are concrete rules in the symbolism/language of math I believe.

    21
  • "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearDA
    datahoarder 11h ago
    Jump
    How can I reduce file sizes of all my photos and videos for storage?
  • SzethFriendOfNimi SzethFriendOfNimi 10h ago 100%

    And utilities for identify the eventual duplicates to save space (while still ensuring you don’t have only 1 copy that can be corrupted)

    Like anything else it’s always trade offs.

    5
  • I SEE RIGHT THOUGH YOU
  • SzethFriendOfNimi SzethFriendOfNimi 23h ago 100%

    Odon’t you start spouting conspiracies. The Dominion would not approve… if it still existed, of course.

    2
  • "I'm literally a fool, what's your excuse?"
  • SzethFriendOfNimi SzethFriendOfNimi 2d ago 100%

    I have. I was introduced to Sanderson about 2.5 years ago and just burned through the cosmere in about 1.

    I’m so excited for the next Stormlight book.

    1
  • "I'm literally a fool, what's your excuse?"
  • SzethFriendOfNimi SzethFriendOfNimi 2d ago 100%

    These words… are accepted

    2
  • Klipper Bed Mesh Issues - Elegoo Neptune 3 Pro
  • SzethFriendOfNimi SzethFriendOfNimi 2d ago 100%

    Range is 0.7. Not great but not as horrible as it looks in the display.

    I’m not familiar with the Neptune and how, if at all, you adjust the bed screws but getting that range nearish to your layer size should do wonders.

    2
  • Amazon cloud boss says employees unhappy with 5-day office mandate can leave
  • SzethFriendOfNimi SzethFriendOfNimi 3d ago 100%

    Cloud hosting business insists its staff need to be onprem.

    67
  • Diagram of a medieval noble's feast
  • SzethFriendOfNimi SzethFriendOfNimi 3d ago 100%

    Wimmelbilderbuch or wimmelbook or even just wimmelbilder

    Your question led me to digging around a bit from highlight magazine to where’s Waldo, trying to find the term for the art style. Eventually that led me to the wimmelbilder subreddit dedicated to building where’s Waldo like art.

    Checking that term led me here to Wimmelbilderbuch

    https://en.wikipedia.org/wiki/Wimmelbilderbuch

    Or wimmelbook

    A Wimmelbilderbuch (German, literally "teeming picture book"), wimmelbook, or hidden picture book is a type of large-format, wordless picture book. It is characterized by full-spread drawings (sometimes across gatefold pages) depicting scenes richly detailed with humans, animals, and objects.[1] Typically made for children, the drawings are filled with characters and items that may be discovered.

    Although it says wordless it does seem the closest fit but maybe you or somebody else can dig further for a better term if there is one.

    14
  • Diagram of a medieval noble's feast
  • SzethFriendOfNimi SzethFriendOfNimi 3d ago 100%

    The taster tasted his last taste.

    7
  • Help me choose a 3D printer of my own
  • SzethFriendOfNimi SzethFriendOfNimi 3d ago 100%

    Awesome but I wish it was more active. That being said the community is primarily located on the Discord channel as far as I can tell

    2
  • How do solo devs make an entire game themselves? M
  • SzethFriendOfNimi SzethFriendOfNimi 3d ago 100%

    I don’t write games but a lot of people that do often say something similar. Do play tests for the concept/mechanics.

    This way you don’t spend time/energy and resources on art and assets that won’t be used, etc.

    Similar to a minimal viable product in regular dev or, perhaps a better analogy, technical demos.

    You want to write a site or app that fetches API data for GPS, calendar and Weather and show them together? You don’t start with the UI. You start with:

    • Can I get the GPS coordinates
    • Can I call another API and get the weather for those coordinates?
    • Can I get the coordinates or other info for some future location?
    • Can I send that to get the weather?

    Once you know you can and that it “works” you build around it.

    So like you said. I have boxes, and this other box (or static PNG of a cat) moves around them and when I move this way it drops the box down on another box.

    Does that work? Does it feel “fun” to arrange them? No, it feels tedious or can’t get the collision right? Then let’s try a different angle or taking the part that did work and iterating on it.

    This also leaves you open to random bugs that end up being “fun” when you lean into them.

    Game Makers Toolkit has some good videos on his journey making “Mind over Magnet”. Here’s the playlist.

    https://youtube.com/playlist?list=PLc38fcMFcV_uH3OK4sTa4bf-UXGk2NW2n

    There’s also PirateSoftware whose entire stream is devoted to “go and make games”

    3
  • Help me choose a 3D printer of my own
  • SzethFriendOfNimi SzethFriendOfNimi 3d ago 100%

    Some vendors that sell LDO and other kits

    https://west3d.com/collections/kits/LDO

    https://kb-3d.com/store/151-shop-full-build-kits

    There are others and you can check out the discord, YouTube channels like Nero 3D “The Canuck Creator” and “Steve Builds” for more info

    3
  • Help me choose a 3D printer of my own
  • SzethFriendOfNimi SzethFriendOfNimi 4d ago 93%

    Since you mention tweaking/adjusting/etc a Voron may be right for you.

    There are kits for sourcing the majority of the stuff and then you build it yourself.

    The Afterburner and Stealthburner are great for ABS out of the gate but there are toolheads that can also work with PLA such as DragonBurner.

    https://www.vorondesign.com

    The entire ecosystem is open especially if you’re using Klipper

    14
  • "I'm literally a fool, what's your excuse?"
  • SzethFriendOfNimi SzethFriendOfNimi 4d ago 100%

    These words are accepted

    18
  • I just updated yesterday to the 1.3.5 release. Unfortunately now when I use my thumb to quickly scroll posts and comments it doesn’t respond. But if I stop, and move very slowly it does register the scroll. After it finally does scroll then for about 10 seconds or so it behaves normally. This doesn’t happen, however, in the top half of the screen. Just the bottom half. Thank you again for all the hard work you do on the app.

    12
    5
    "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearCA
    CAD SzethFriendOfNimi 6mo ago 95%
    Modernizing the best Woodworking Joint to use for 3D Printing
    https://youtu.be/zI8OgRRF5d8
    20
    2
    youtube.com

    From Tom Bate’s phenomenal Nigel (the tiny Wizard) and Marmalade.

    8
    1
    "Initials" by "Florian Körner", licensed under "CC0 1.0". / Remix of the original. - Created with dicebear.comInitialsFlorian Körnerhttps://github.com/dicebear/dicebearCA
    CAD SzethFriendOfNimi 7mo ago 100%
    Connect 3D Printed Parts | Design for Mass Production 3D Printing
    https://youtube.com/watch?v=djm5tCFn9S0
    16
    1

    I got a singer 8606 from a yard sale and am having trouble finding a manual online and what parts work with it? E.g. compatible bobbins, needles, etc.

    6
    2
    https://www.eff.org/deeplinks/2022/12/user-generated-content-and-fediverse-legal-primer

    I found this interesting and was wondering how some of the larger instances handle the issues they outline such as Copyright/DMCA Safe Harbor CSAM Law enforcement/warrants/info inquiries And not included (since it’s focus is on US legal issues) but I’m curious about would be other regulations such as EU user data retention

    64
    5