3DPrinting csm10495 • 3d ago • 93%

Weird PETG Printing Behavior

imgur.com

Hey folks, I'm not sure what I'm doing wrong. I'm printing PETG (https://kingroon.com/collections/petg-filament?) on my Neptune 3 Plus. It's sort of like it starts (almost) ok, sticks to the plate just fine, then a few layers up it seems to almost have inconsistent extrusion (or maybe even trouble pulling the filament?) leading to holes, etc. till the model just falls apart. See linked photos for about where I give up each time. I'm printing with Cura and 240C printing, 90C on the build plate. 45mm/s (I've gone down from 60mm/s). Retraction on, no z-hop. 60% fan, though I've tried it with 20% and 100% fan as well. The filament is in a dryer at 55C. Funny enough I printed basically perfectly (without drying, straight out of the bag) with default settings the first time I printed. The second time and on, have had this problem... and have had it in the dryer. Any ideas would be much appreciated. Thanks! Edit: In case its useful, I'm printing this piece: https://file.io/D9jxYq4KOrL7 which is a small remix of a piece from https://www.printables.com/model/130507-bolt-action-pen-for-pilot-g2-cartridges

SquaredCircle csm10495 • 2mo ago • 100%

Bart's Sacrifice (Possible Botchamania Ending)

Finally got around to making a botchmania ending. Enjoy!

Asklemmy csm10495 • 3mo ago • 96%

Is it wrong to report email as spam when you previously opted out and they either add a new subscription/newsletter, etc.?

For example, I opt out of all emails from a website. A year later they make a new newsletter and auto subscribe all to it. I login, hit unsubscribe, then report as spam in my email client. I figure auto adding me is more/less spamming me. Do y'all agree?

Electric Vehicles csm10495 • 3mo ago • 81%

Why does the US government subsidize the building of EV chargers?

driveelectric.gov

At one point I thought that if the Government was giving money for EV chargers, they would be either at-cost or free to use. One of the first built was at a Flying J truck stop in Ohio. I looked on plug share and found one in Hubbard, OH and it's 67c per kwh (https://www.plugshare.com/location/582660). The average cost of electricity in that area is less than 15c per kwh. At that kind of price, gas could be a cheaper option. Why does the government subsidize in a way where already wealthy companies get public money to build chargers, and make a ton more money off the rest of us? (This is not a political statement at all. I just don't understand why public money goes to make certain private folks more wealthy. I figure I must be missing something). Thanks for your thoughts!

Sync for Lemmy csm10495 • 4mo ago • 100%

Back animation not working

Anyone having a new issue where swiping from the left to go back to the thread list from a thread doesn't load properly and instead shows a black screen for a second or so. Screen recording: https://imgur.com/a/bvzkyfu All animations in the settings are enabled.

So I was using a wood sealer (https://www.amazon.com/dp/B01AQTX3XU) on my newly built catio. Unfortunately I didn't notice how much I had sprayed on the adjacent window. Now I have cloudy/foggy windows (https://imgur.com/a/TKD9wim). I've tried cleaning them with:- - - - - water via the hose directly on the window.. very little progress - windex.. very little progress - dish soap followed by host.. very little progress - vinegar.. very little progress Any ideas for what might get this stuff off easily?---

ShowerThoughts csm10495 • 6mo ago • 94%

I'd consider buying a Fisker car if the software/firmware was open source

I wouldn't be as worried about them going out of business and me being stuck with half broken car software.

Security csm10495 • 7mo ago • 92%

Fidelity and passwords via T9

Anyone here use fidelity (https://www.fidelity.com/)? I had to call to get something done with my account and thought it was weird that they have you (more/less) T9 dial your password into the system, though its not real T9 in that (for example) one press of 2 would mean either a,A,b,B,c,C,2. They say for special characters just give a * sign. Any thoughts on if that is safe on their part? It seems weird to me since they either need the password in plaintext on their end or I guess the hash of the T9 version of the password which would be less secure anyways because of: all one case and only one type of 'special character'. And yes: before you ask this was 100% the actual fidelity phone number: +1 800-343-3548 In their defense they did ask for other verification information once I got a person, but still felt really weird. Any thoughts on the security of this mechanism?

sh.itjust.works Main Community csm10495 • 8mo ago • 100%

Mlmym instance?

Hey folks, Is it possible to have a [mlmym](https://github.com/rystaf/mlmym) endpoint for sh.itjust.works? Maybe old.sh.itjust.works? I know the lemmy ui has come a decent ways.. but sometimes I just want to look at it like old reddit. lemmy.world has one: https://old.lemmy.world/ If not: no big deal. if so: would be cool.

Mechanical Keyboards csm10495 • 8mo ago • 96%

Looking for a keyboard

It's a sad day: My previous mechanical keyboard more/less died. Multiple keys just stopped working and even upon replacing them with new switches: still dead. So anyways I'm looking for a keyboard with some specific features: Anyone know of one that is: - full size (extra macro keys would be a bonus!) - rgb backlit - has at least one usb port on it (so it has a builtin hub of sorts) Super bonus if it also has a type c passthrough port. - user-swapable cherry-mx compatible switches. (bonus if it comes with browns) - bonus points if it can run open-source firmware - bonus points if it has a volume spinner-thing I know its asking a bunch, but hey if someone has seen one of these, or has ideas: let me know. Budget: idk, but I'd be willing to pay probably $200 ish if it was a perfect match and seemed legit. Thanks in advance

Android csm10495 • 9mo ago • 100%

App with REST Server for device info?

Hey folks, Does anyone know of an app (FOSS or otherwise) that has a built-in REST-server to get current device info? I'd like to be able to hit the API from within my local network to get info including: - Free space vs used space - Battery percentage Why? I have an old Android device that sits in the closet as a Syncthing node. It does some other random stuff too. I don't really want to have to get up and look at it to find out certain information. I already have a VNC server running on it. I even have a (sketchy) SSH server on it that I currently call `df -h` on to programmatically get free space info. The SSH server has some weirdness where it seems to stop working after some time, among other oddities. Also it can't get battery level afaict. I imagine this is possible using ADB, but I don't really want to have to always leave the device in wireless ADB mode or manually put it in that mode each time; unless that is easier than I think. Thanks!

TIFU csm10495 • 9mo ago • 100%

TIFU when buying stamps for post cards

Obligatory: this was yesterday (1/20/24) In the US 1/20/24 was the last day to buy stamps at the old postage rate. The flat rate for postcards was 51 cents and was going up to 53 cents the next day. They have a concept called forever stamps for regular letters and a similar thing for postcards. If you buy them today at today's price, you can use them at any time in the future regardless of price increases. So if you'll mail letters or postcards, they're a good deal and future investment. So anyways we ran to the post office at 4pm. The office was closed except for the self service machine. We need about 90 postcard stamps so I figured I'd get 100 to have some extras for the future. I was so excited to see postcard stamps for 51 cents. I took a picture: https://i.imgur.com/M997Nfg.jpeg So we bought 100, which happened to be the most we can buy at once. At that point the machine began printing 100 individual 51 cents stamps. Now you may have noticed the issue: it wasn't 100 postcard stamps, but rather 100 stamps each saying 51 cents of value. It took a long time as each stamp was printed one by one, but I got to stand there sad as I didn't get my forever postcard stamps. Now to mail my postcards, I'll need to buy 2 cents of postage each (or more when it goes up again). I'll be more careful next time. Tldr: I bought 51 cent stamps instead of postcard stamps for 51 cents. Edit: commented with an update after a few days.

An electrician 'fixed' an issue by making this hole in a basement cinder block wall. .. how do I put that box back in or fix the wall or something? Inside the box are two capped (hot) wires. The pipe seems to be copper. Doesn't bend or anything. It can't (at least easily) be pushed back in. I had wanted to use cement paste.. but like what do I do about the box? I guess I could paste everything except the metal pipe but geez: then i still have this sketchy box hanging out. Images: https://imgur.io/a/yBh2QBD (posted from mobile and don't think the images went through) Any ideas?

Android csm10495 • 1y ago • 89%

Archive all old Android/Google Messages?

Does anyone know of a way to archive all messages in Android/Google Messages maybe older than a certain timeframe? I have 100s of old conversations spanning back several years. I finally decided it would be nice to archive (not delete) ones that aren't relevant at the moment. The only way I figured to do this is swipe each conversation one by one. Is there a faster way to just do it all in one swoop? Edit: I wrote a quick script to do it via manipulating the Google Messages webui: https://sh.itjust.works/comment/4646349 Worked for me!

3DPrinting csm10495 • 1y ago • 100%

Octoprint bed leveling (Neptune 3 Plus)

Hey folks, Anyone have the gcode to do bed leveling and then emit the info back for the octoprint bed level visualizer? I have an Elegoo Neptune 3 Plus. I tried the bilevel one on the GitHub page but it seems to make my printer get stuck at home after running. Edit: it almost seems like when it finishes it just gets stuck in the center with the extruder heat still on. Usually I have to reboot the printer to get it up again. Sort of like it wants me to go check the z offset.

SquaredCircle csm10495 • 1y ago • 83%

State of this community

Hey folks, I'm going to pause the bot at this time. The community didn't quite take off at this point, so for now I'm going to recommend using [!SquaredCircle@kbin.social](https://kbin.social/m/SquaredCircle). I don't have the time to put in the love needed to grow it at this point. If another member or mod wants to be added and give it love, let me know. For now I'm limiting posts to mods only.

Mildly Interesting csm10495 • 1y ago • 92%

This elevator reuses floor numbers

imgur.com

Also in an order that confused me.

Selfhosted csm10495 • 1y ago • 98%

How do you handle secrets in home automation?

Say you have a script or something that gets run in cron/task scheduler and it needs a password.. say to ssh to a raspberry pi elsewhere in your house. How do you save that password in a way that automation can access it? Some ideas: - Plaintext file. Not a fan because its sitting unencrypted on the box somewhere. - Environment variable. Not a fan because its still unencrypted somewhere to someone on the box (albeit likely the same user or an admin). - A secrets manager. If I use something locally like hashicorp vault or infisical, I can get to a point where a cli/api call gets the password. Though in this case I still need a vault password/secret to get my password. So I fall back to needing one of the above to get this to work. If the secrets manager is easily available, the secret to get into the secrets manager is available as well leading to a feeling of security by obscurity. If someone breaks into my system via SSH/etc. then they can get the passwords either way. .. How do people normally do this? I'm not sure I actually get anything out of a secrets manager if its local and I have the disk itself encrypted before login. What actually makes sense at a personal/home scale? (Edit: I know using SSH key probably is better for getting to the raspberry pi, but still the question is the same idea).

Linus Tech Tips (Unofficial) csm10495 • 1y ago • 60%

Promo code for free shipping on $150+ @ lttstore.com

code is "hireddit" from WAN. Apparently will be up for a few hours.

Mildly Infuriating csm10495 • 1y ago • 98%

Part of the Social Security website (ssa.gov) only works during certain hours

.. its a website run by the US Government. Why does it have such large downtimes in this day and age?